Based on the continuous upgrade of 3000W fiber laser cutting machine, 6000W and higher power fiber laser cutting machines have also emerged. However, many people may not understand the difference between 6000w and 3000w fiber laser cutting machines. Today we will use two different power machines to conduct a comprehensive comparative analysis.
Carbon steel bright cut
Analyzing the cutting thickness of the fiber laser cutting machine, the bright surface cutting thickness of the 3kW fiber laser cutting machine is about 10MM; compared with the 3000W fiber laser cutting machine, the bright surface cutting thickness of the 60kw fiber laser cutting machine is much greater than that of the 3000W fiber laser cutting machine, its bright surface thickness is less than 16MM can be cut, and the cutting speed is fast and the verticality is good.
Carbon steel full power cutting
Full power cutting means 100% power cutting. The 6000W fiber laser cutting machine has the advantages of high electro-optical conversion efficiency, good beam quality, and high power density. In actual operations, because the 6000W fiber laser cutting machine has full power cutting Capacity, fast cutting speed, small taper and other advantages, so carbon steel materials with a thickness of 16-25mm can be cut using a 6000W fiber laser cutting machine.
Stainless steel cutting of 3000w fiber laser cutting machine vs 6000w
6000W fiber laser cutting machine complies with the laser equipment safety standards of developed countries in Europe and the United States and uses laser beam cutting. Compared with the 3000W fiber laser cutting machine, the cutting speed of the 6000W fiber laser cutting machine can be increased by 140%~330 %, which can effectively improve work efficiency.
Burr-free cutting
Commonly used laser cutting machines use oxygen or nitrogen for operation. When the cross-section requirements are not high, the fiber laser cutting machine can also use air for cutting. The air is compressed into a storage tank through an air compressor. The filter cooler can be used after cooling and drying, which can effectively reduce the user’s cost.
Among the fiber laser cutting machines of the same brand, the lower power machine can cut 2.5mm thick carbon steel and 10mm stainless steel materials without burrs; on the other hand, the higher power machine can cut 5mm thick carbon steel and 16mm stainless steel materials without burrs. , among the same types of fiber laser cutting machines, the material thickness that the 6000W laser cutting machine can process far exceeds that of the 3000W laser cutting machine.
With the continuous development and upgrading of KRRASS laser cutting machines, the cutting power of Hugong fiber laser cutting machines has now far exceeded 6000W. The cutting power of large-format gantry plane laser cutting machines equipped with fiber lasers can reach 30000W, and can be unlimited Extended processing range, infinite extension of machine tool guide rails, simultaneous cutting of multiple plates, suitable for batch processing of large-format, medium-thick plates.
English 
French 
German 
Spanish 
Portuguese 
Russian 
Arabic