Параметры лазерной резки 15000 Вт

Копировать Х Фейсбук LinkedIn Электронная почта Печать

In the dynamic world of metal fabrication, precision and efficiency are paramount. The latest 15000W laser cutting machine, equipped with a 100μm multimode laser source, is designed to meet these demands, offering unparalleled cutting capabilities. This article explores the cutting parameters of our advanced 15KW laser cutter, providing you with the detailed information needed to optimize your operations and achieve superior results.

Cutting Parameters Overview

The cutting parameters for a 15000W laser cutting machine are essential to achieving high-quality cuts with minimal waste. These parameters include cutting speed, focal position, gas pressure, and power settings, which vary based on the material type and thickness. Below, we present a comprehensive table of cutting parameters for different materials to help you achieve optimal results.

Параметры лазерной резки 15000 Вт

Материал	Thicknes (mm)	Speed (m/min)	Power (W)	Gas	Pressure (bar)	Nozzles (mm)	Focus Point (mm)	Cutting Height (mm)	Remark
Углеродистая сталь	1	60-80	15000	N2 / Air	10	2.0 Single	0	1	1
Углеродистая сталь	2	50-60	15000	N2 / Air	10	2.0 Single	0	0.5	1
Углеродистая сталь	3	30-33	15000	N2 / Air	12	3.0 Single	0	0.5	1
Углеродистая сталь	4	23-26	15000	N2 / Air	12	3.0 Single	0	0.5	1
Углеродистая сталь	5	20-22	15000	N2 / Air	12	3.5 Single	0	0.5	1
Углеродистая сталь	6	17-19	15000	N2 / Air	12	3.5 Single	0	0.5	1
Углеродистая сталь	8	11-12	15000	N2 / Air	12	4.0 Single	-1	0.5	1
Углеродистая сталь	10	7-8	15000	N2 / Air	13	4.0 Single	-1	0.5	1
Углеродистая сталь	12	5-6	15000	N2 / Air	13	4.5 Single	-2	0.5	1
Углеродистая сталь	14	4.0-4.5	15000	N2 / Air	15	4.5 Single	-6	0.5	1
Углеродистая сталь	16	3-3.5	15000	N2 / Air	16	5.0 Single	-8	0.5	1
Углеродистая сталь	10	2.0-2.3	6000	O2	0.6	1.2 Double	8	0.5	2
Углеродистая сталь	12	1.8-2.1	7500	O2	0.6	1.2 Double	8	0.5	2
Углеродистая сталь	14	1.7-1.8	8500	O2	0.6	1.4 Double	9	0.5	2
Углеродистая сталь	16	1.6-1.7	9500	O2	0.6	1.4 Double	10	0.5	2
Углеродистая сталь	20	1.4-1.6	15000	O2	0.6	1.6 Double	12	0.5	2
Углеродистая сталь	22	1.2-1.4	15000	O2	0.7	1.6 Double	12	0.5	2
Углеродистая сталь	25	1.0-1.2	15000	O2	0.7	1.4 Single	13	0.3	2
Углеродистая сталь	30	0.4-1	15000	O2	0.9	1.6 Single	12	0.3	2
Углеродистая сталь	60 *	0.2-0.3 *	15000	O2	1.3 *	1.8 Single *	+13 *	0.3 *	2
Углеродистая сталь	70 *	0.1-0.2 *	15000	O2	1.5 *	1.8 Single *	+13 *	0.3 *	2
Нержавеющая сталь	1	60-80	15000	N2	8	2.0 Single	0	0.5
Нержавеющая сталь	2	40-45	15000	N2	8	2.0 Single	0	0.5
Нержавеющая сталь	3	34-38	15000	N2	8	3.5 Single	0	0.5
Нержавеющая сталь	4	23-30	15000	N2	8	3.5 Single	-1	0.5
Нержавеющая сталь	5	18-23	15000	N2	8	4.0 Single	-1	0.5
Нержавеющая сталь	6	16-19	15000	N2	8	4.5 Single	-2	0.5
Нержавеющая сталь	8	10-12	15000	N2	10	5.0 Single	-3	0.5
Нержавеющая сталь	10	8-10	15000	N2	10	5.0 Single	-4	0.5
Нержавеющая сталь	12	6-7	15000	N2	12	5.0 Single	-5	0.5
Нержавеющая сталь	14	3.5-4.5	15000	N2	12	5.0 Single	-7	0.5
Нержавеющая сталь	16	2.5-3.5	15000	N2	16	5.0 Single	-8	0.5
Нержавеющая сталь	18	1.8-2.3	15000	N2	18	5.0 Single	-9	0.5
Нержавеющая сталь	20	1.5-2.0	15000	N2	20	5.0 Single	-11	0.5
Нержавеющая сталь	25	0.9-1.2	15000	N2	25	5.0 Single	-13	0.5
Нержавеющая сталь	30	0.3-0.4	15000	N2	25	5.0 Single	-16	0.5
Нержавеющая сталь	40 *	0.15-0.2 *	15000	N2	25 *	5.0 Single *	+8 *	0.5 *
Нержавеющая сталь	50 *	0.1-0.15 *	15000	N2	25 *	5.0 Single *	+9 *	0.5 *
Нержавеющая сталь	1	60-80	15000	Air	10	3.0 Single	-1	1
Нержавеющая сталь	2	40-60	15000	Air	12	3.0 Single	-1	0.5
Нержавеющая сталь	3	30-35	15000	Air	13	3.5 Single	-1	0.5
Нержавеющая сталь	4	25-28	15000	Air	14	3.5 Single	-2	0.5
Нержавеющая сталь	5	22-25	15000	Air	16	4.0 Single	-4	0.5
Нержавеющая сталь	6	18-20	15000	Air	16	4.5 Single	-4	0.5
Нержавеющая сталь	8	10-12	15000	Air	16	4.5 Single	-4	0.5
Нержавеющая сталь	10	8-9	15000	Air	16	4.5 Single	-5	0.5
Нержавеющая сталь	12	6-7	15000	Air	18	4.5 Single	-6	0.5
Нержавеющая сталь	14	4-4.2	15000	Air	18	5.0 Single	-8	0.5
Нержавеющая сталь	16	2.5-3	15000	Air	20	5.0 Single	-10	0.5
Нержавеющая сталь	18	2-2.3	15000	Air	20	5.0 Single	-10	0.5
Нержавеющая сталь	20	1.8-2	15000	Air	25	5.0 Single	-15	0.5
Нержавеющая сталь	25	1.2-1.4	15000	Air	25	6.0 Single	-19	0.5
Нержавеющая сталь	30	0.8-1	15000	Air	25	6.0 Single	-21	0.5
Нержавеющая сталь	35 *	0.4-0.6 *	15000	Air	25 *	6.0 Single *	-24 *	0.5 *
Aluminium Alloy	1	60-70	15000	N2	10	3.0 Single	0	0.6
Aluminium Alloy	2	40-50	15000	N2	12	3.0 Single	-1	0.5
Aluminium Alloy	3	34-40	15000	N2	14	3.0 Single	-1	0.5
Aluminium Alloy	4	21-26	15000	N2	14	3.5 Single	-2	0.5
Aluminium Alloy	5	16-20	15000	N2	14	3.5 Single	-3	0.5
Aluminium Alloy	6	135-15	15000	N2	14	4.0 Single	-4	0.5
Aluminium Alloy	8	9-11	15000	N2	16	4.0 Single	-6	0.5
Aluminium Alloy	10	6-8	15000	N2	16	4.5 Single	-7	0.5
Aluminium Alloy	12	2.5-4	15000	N2	16	4.5 Single	-9	0.5
Aluminium Alloy	14	2-3	15000	N2	16	5.0 Single	-9	0.5
Aluminium Alloy	16	1.5-2	15000	N2	18	5.0 Single	-10	0.5
Aluminium Alloy	18	1.3-1.8	15000	N2	18	5.0 Single	-11	0.5
Aluminium Alloy	20	0.8-1.3	15000	N2	20	5.0 Single	-13	0.3
Aluminium Alloy	25	0.5-0.7	15000	N2	25	5.0 Single	-14	0.5
Aluminium Alloy	30	0.4-0.5	15000	N2	25	5.0 Single	-17	0.5
Aluminium Alloy	40 *	0.2-0.3 *	15000	N2	25 *	5.0 Single *	+8 *	0.5 *
Aluminium Alloy	50 *	0.1-0.2 *	15000	N2	25 *	5.0 Single *	+9 *	0.5 *
Латунь	1	50-60	15000	N2	12	2.0 Single	0	1
Латунь	2	38-42	15000	N2	12	2.0 Single	-1	0.5
Латунь	3	25-30	15000	N2	12	3.0 Single	-1	0.5
Латунь	4	20-24	15000	N2	12	3.5 Single	-2	0.5
Латунь	5	18-21	15000	N2	14	3.5 Single	-3	0.5
Латунь	6	9-11	15000	N2	14	4.0 Single	-3	0.5
Латунь	8	7-9	15000	N2	14	4.0 Single	-4	0.5
Латунь	10	5-6	15000	N2	14	4.5 Single	-5	0.5
Латунь	12	3-3.5	15000	N2	14	4.5 Single	-5	0.5
Латунь	14	2.5-3.0	15000	N2	16	4.5 Single	-8	0.5
Латунь	16	1.3-1.5	15000	N2	18	5.0 Single	-11	0.5
Латунь	18 *	1.0-1.2 *	15000	N2	18 *	5.0 Single *	-11 *	0.5 *
Латунь	20 *	0.6-0.8 *	15000	N2	18 *	5.0 Single *	-12 *	0.3 *
Медь	1	38-42	15000	O2	10	2.0 Single	-0.5	0.6	3
Медь	2	28-32	15000	O2	10	2.0 Single	-1	0.5	3
Медь	3	20-24	15000	O2	10	3.0 Single	-2	0.5	3
Медь	4	14-16	15000	O2	12	3.5 Single	-3	0.5	3
Медь	5	8-10	15000	O2	12	3.5 Single	-4.5	0.5	3
Медь	6	6-7	15000	O2	13	4.0 Single	-5	0.5	3
Медь	8	2.5-3.5	15000	O2	13	4.0 Single	-6	0.5	3
Медь	10	1.5-2.0	15000	O2	14	4.0 Single	-8	0.5	3

Important Remarks

Remark 1: It is recommended to use air or nitrogen for cutting carbon steel 1-6mm. The cutting speed is faster than using oxygen, and there will be slight slag hanging.
Remark 2: Depending on the on-site gas purity, plate quality, etc., the power used for debugging and the speed of debugging will also be different.
Remark 3: Copper needs to be cut with high-pressure oxygen. Using other gases for cutting may risk damaging the laser.

Note on Actual Cutting Conditions

Примечание: The actual batch cutting, affected by machine tools, systems, cutting head, air pressure, materials and other factors, the data may be changed, the asterisks marked parameters in the table are proofing parameters, in the actual processing is greatly affected by various factors, only suitable for small batch production, mass production and processing is not recommended, it is recommended to use higher power laser.

Optimizing Your Cutting Process

Understanding and applying the correct 15000W laser cutting parameters is essential for achieving high-quality, precise cuts. By fine-tuning power output, cutting speed, focus position, gas pressure, and pulse frequency, you can optimize your laser cutting operations to meet specific material requirements. Our latest 15KW laser cutting machine, with its advanced features and customizable parameters, ensures superior performance and efficiency.

For more detailed information and to explore how our 15000W laser cutting machine can enhance your production process, visit our website. Stay tuned for more updates and insights on laser cutting technologies.